One robot - two pedal options:
Due to its design, the CP800 multi-purpose pedal robot can be used for the brake or clutch pedal.
The robot is installed directly in front of the driver's seat. Due to the small dimensions of the robot, the simultaneous operation of several systems in the vehicle is possible.
The pedal forces and speeds of the robot are absolutely sufficient for most standard driving manoeuvres such as the Euro-NCAP AEB test. With pedal speeds of up to 100 cm/s and pedal forces of up to 800 N, sufficient reserves are available.
Built-in pedal robot CP800
Drive unit mounted directly in front of driver's seat
With special templates for a wide range of experiments
The unique concept of the multi-purpose pedal robot CP800
quick and easy installation
The pedal robot can be installed in the shortest possible time in almost any commercially available vehicle..
pedal actuation through lever arm mechanism
With the help of its universal mounting system the robot is fixed either to the driver seat or to the seat fixing points. The second mechanical connection to the car is made via a bracket, that is clamped to the vehicle pedal. Changes to the vehicle must not be made for this purpose. A lever arm with adjustable length between the robot and the vehicle pedal transmits the movements. Therefore the robot can be installed in a very short time.
wide range of control modes
All control modes of our brake robots are available: pedal position, pedal force, hydraulic brake pressure and vehicle deceleration. Switching between the various control modes is of course possible also within a test run.
small and lightweight
The Multipurpose Pedal Robot CP800 can provide a pedal force of up to 800N and a pedal velocity of up to 100cm/s.
Its design is highly integrated so that an operation even in small vehicles is easily possible.
high pedal forces without time limit
Because if its unique design our multipurpose pedal robot CP800 can provide high pedal forces without time limit. Unlike other systems which must be switched off after a specific period of time our system can push down the clutch or brake pedal without the need to reduce the force.
For many years VEHICO successfully uses an intuitive scripting language with which all possible profiles can be freely programmed by simple commands and associated parameters.
Likewise all robots the VEHICO pedal robot is equipped with an OBD2 interface. With this you are conveniently enabled to use the cars own velocity signal as trigger signal for brake tests and can abandon an external sensor.
synchronized operation with all VEHICO robots possible
The pedal robot CP800 is combinable with all other VEHICO steering and gas pedal robots. All driving robots can be operated together from one common webinterface, they can run synchronized between each other and the logged data is merged.
max. speed brake pedal
max. force brake pedal
Areas of application
Wide range of applications
Due to their enormous flexibility, our pedal robots are used in a wide range of different applications:
- Use in vehicles with active brake assist in soft crash tests in conjunction with TTC (time to collision) triggers.
- Brake Pressure Analysis
- automated braking manoeuvres
- ... and much more