There are different methods to specify the desired values.

  1. The most frequently used method is the definition through the native scripting language. This can be used to quickly and easily combine different control modes and to generate the desired value profiles.
  2. Via the CAN interface the desired values can be read online, which are then actuated by the robot in real time. This method is used whenever the desired values should be transmitted from another computer to the robot during the test run.
  3. Desired values can be teached by the driver driving a special maneuver while the system records the driver actuation. The data collected can then be provided to the system as desired values, so that the manual maneuver can be repeated with highest precision.
  4. Desired values can be imported via an open file format. The user has the possibility to export the desired value profiles from any software (Matlab, Excel or your own program) to a file. This file is transmitted to the robot, imported and subsequently converted into robot movements.


VEHICO Steering Robot CS-B - 'discover the possibilities'!. The use of a steering robot has never been easier. Configure your steering angle trajectories through a easy to use web interface. Even nondefault steering maneuvers can quickly and easily be created through a simple scripting language.

What customer say about us

"The simple installation of the VEHICO Steering Robot has convinced us right away. No long removal of the steering wheel, no production of steering wheel adapters and especially no more trouble with the vehicle electronics - just mount the steering robot behind the vehicle steering wheel and start working."


Buechnerstrasse 6
38118 Braunschweig

Phone: +49 531 20835 110
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Scroll to top